













Evarine Rust Removal Paste
“Ten minutes with a brush now beats a full rust-out and a $1,200 body shop bill later.”
60-Day Money-Back Guarantee
We’re sure this will finally stop the rust, so every order is backed by a 60-day money-back guarantee.
Not 100% happy with the results? Email support@tryevarine.com and we’ll refund your entire order.
Shipping and Returns
Every order ships with tracking.
Order processing time: 1–3 business days.
Standard shipping: 5–8 business days, free on orders over $50.
Returns are covered by our 60-day money-back guarantee.
What if my vehicle’s color isn’t listed?
Pick the closest shade. It doesn’t need to be a perfect match: most rust spots sit on wheel wells, rocker panels and door edges, where a close color is all anyone sees. For a spot people look at up close, use Silver/White and paint over it with touch-up paint once it cures.
What makes Evarine different from spray paint or other rust products?
Most rust sprays just sit on top of the rust. They chip and peel within a few months, and moisture gets right back underneath. Evarine works down into the rust and bonds to the metal, so it seals the spot instead of hiding it. Once it cures, sand it smooth and paint right over it, or leave it as it is where looks don’t matter.
Will it work on heavy rust or rust that’s gone all the way through?
Evarine is made for surface rust and spots you catch early. If there’s a hole, or the rust has eaten all the way through, that’s structural damage and a body shop is the right call. The earlier you catch a spot, the better it works, so don’t wait for spring.
How many spots can I fix with one jar?
You brush it on in thin coats, so a little goes a long way. Most people fix 5 to 10 spots with one jar, depending on how big each spot is.
“I’ve worked on cars for over 20 years, and the most expensive mistake I see is ignoring small rust spots until they turn into body work. Evarine lets you treat those spots early, before they spread. You brush it on, it bonds to the metal and it seals the spot off from moisture. I wish more of my customers knew about it before they roll in needing a $1,200 repair.”
Evarine uses a rust-converting formula that reacts with oxidized metal on contact. Instead of sitting on top like spray paint, tannic acid works into the rust underneath and turns it into a stable layer that moisture and road salt can’t get through.
Alkyd resin in the paste then hardens as it cures into a tough coat over the spot. Once it’s set, sand it smooth and paint right over it for a finished look, or leave it as it is for long-term protection where looks don’t matter.
Sand or wire-brush off any loose, flaking rust. Wipe the spot clean and dry. Brush on a thin, even coat of Evarine and let it cure for 24 to 48 hours.
- 🔧 Small spots (quarter-sized or smaller): 1 thin coat
- 🔧 Medium spots (palm-sized): 2 coats, 24 hours apart
- 🔧 Larger areas (fist-sized or bigger): 2 to 3 coats, 24 hours apart
- 🔧 One jar covers 5 to 10 typical spots on a vehicle
- 🔧 Sand smooth and paint over once cured, or leave it as it is
- 🛡️ Stops rust from spreading deeper into the metal
- 🔒 Cures into a hard barrier against moisture, rain and road salt
- 🖌️ Thick brush-on paste: no overspray, no drips, no complicated prep
- 🎨 Paintable once cured for a clean, finished look
- 🚗 Works on cars, trucks, boats, trailers, fences and any steel or iron
- ⏱️ About 10 minutes of hands-on time per spot
One Coat. Drag to See the Difference.
Pick a rusty part, then drag the handle across to see it before and after one coat of Evarine.
- Brushes on in about 10 minutes, start to finish
- No primer, no sanding down to bare metal
- Hard and sealed in 24 to 48 hours
- 6 colors to match your paint, mix and match per jar
Real Trucks. Real Rust. Real Results.

2007 Toyota Tacoma
Had some ugly bubbling rust on both cab corners that was only getting worse. Cleaned it down, put Evarine on there, and honestly it came out way better than I thought it would for a $29 jar. Beats paying a body shop $400 per side.
Toyota Tacoma
2005 Chevy Tahoe
Living in Wisconsin means salt eats everything. The rust around my rear wheel arches was getting embarrassing. Applied Evarine over a weekend and now it actually looks decent again. Simple process, no special tools needed.
Chevrolet Tahoe
2009 Ford Ranger
My Ranger has 180k on it and the bed sides were starting to get those brown spots pretty bad. Used Evarine to clean them up before they turned into holes. Happy with how it turned out, especially for the price.
Ford Ranger
The Rust You Painted Over Is Still Eating Your Truck
Rust doesn’t just sit on top of the metal. It eats down into tiny pits that sandpaper and a wire brush can’t reach. Paint or fill over those pits and the rust underneath keeps eating. The first hairline crack lets salt water back in, and by spring the paint is bubbling in the exact same spot.
- The same bubble shows up in the same spot every spring
- The spray converter ran down the panel before it could work
- The touch-up paint is lifting at the edges again
- The paint flakes off under your thumbnail, and it’s orange underneath
Cover It Every Year, or Seal It Once
Follow one rust spot through one salt-belt winter. Drag the slider.
Touch-up paint
Painted over in OctoberLooks fine for now. The paint hides the spot, but the rust down in the pits is still eating.
Evarine
Brushed on in OctoberBrushed into the pits. The rust is converted and sealed in one coat.
What Would a Body Shop Charge You for This?
Count your rust spots, pick a typical size and see what you keep.
Shop prices are rough estimates for small cosmetic rust repairs and change a lot by area, vehicle and how far the rust has spread. Evarine is for surface rust and early spots, not holes.
Evarine vs. the Spray Can on the Shelf
- Converts it and seals it. Tannic acid turns the rust stable, then alkyd resin locks it in.
- Stays where you brush it. Bentonite clay keeps it thick on a door edge or rocker until it’s done working.
- Done in a weekend. Brush it on Saturday, let it set, drive it Monday.

What’s in Every Jar (and Why)
Every ingredient is printed on the label, and every one has a job.
Use in a place with fresh air and wear gloves. Keep away from children.
Fix a Rust Spot in One Afternoon, No Welder Needed
Clean it up
Knock off loose, flaky rust with a wire brush or sandpaper, then wipe the spot clean and dry. No need to grind down to bare metal.
Brush on an even coat
Work the paste into the rust spot. Give it about 10 minutes, then wipe off anything the metal didn’t soak up.
Let it set
Most spots are hard in 24 to 48 hours. A bad spot gets a second thin coat the next day.
Drive it
Leave it as it is, or sand it smooth and paint over it. Check it before the salt starts and again when it ends.
Made for Any Steel That Sees Salt
Trucks and daily drivers
Rockers, cab corners and wheel arches catch the worst of the winter spray. Seal the rust spots now, before they turn into a $1,000 rocker panel bill.
Salt-belt commuters
If your roads get salted, every stone chip can turn into a rust spot. Keep a jar in the garage and seal them while they’re still small.
Classic and project cars
Keep surface rust from spreading while the car waits its turn. It paints over once it sets, so it won’t get in the way of bodywork later.
Boats and trailers
Trailers get dunked and parked wet, and boat hardware lives in it. Seal the frame, fenders and hitch anywhere the coating has worn through.
Farm and yard equipment
Tractors, mowers and plows are steel that lives outside. Brush it onto the worn spots instead of repainting the whole machine.
Fences, gates and railings
Iron gates and railings rust at the welds and along the bottom rail. One coat on each spot stops it from spreading.

Evarine Is Right for You If...
- You plan to keep your vehicle and drive it for years
- You’ve got bubbles on the rockers, cab corners or wheel arches
- You tried a spray, touch-up paint or undercoating and the rust came right back
- The metal is still solid, with no holes
- You don’t want to pay a body shop $400 a spot or learn to weld
- You’d rather fix it yourself in your own driveway on a weekend

60-Day Money-Back Guarantee
Brush it on your worst rust spot and watch it hold up through the salt. If you’re not happy with the results, contact us within 60 days and we’ll refund your order.
Got Questions?
What is Evarine Rust Removal Paste?
A thick paste you brush onto rust spots. Tannic acid converts the rust down in the pits, a thin solvent oil carries it there, bentonite clay keeps it in place, and alkyd resin sets on top into a sealed coat in your vehicle’s color.
How is it different from spray paint or rust converter?
Paint sits on top of the rust and hides it. Thin converters run down a vertical panel before they finish working in the pits. Evarine is thick enough to stay on the spot until it’s done, then it seals it, so you convert the rust instead of covering it.
Do I need to sand down to bare metal?
No. Knock off any loose or flaky rust with a wire brush or sandpaper, then wipe the spot clean and dry before you brush it on. Five minutes of prep is enough.
What if my color isn’t one of the 6?
Pick the closest one. Most rust spots are on wheel wells, rockers and door edges, where a close color looks fine. For a spot people will see up close, use Silver/White and paint over it once it sets.
Can I paint over it?
Yes. Once it’s fully hard, sand it smooth and paint right over it, or leave it as it is on spots where looks don’t matter.
How long does it take to set?
Most spots are hard in 24 to 48 hours. Cold weather and thick coats take longer. It’s ready when it feels hard, not tacky, under your fingernail.
Will it fix holes?
No. Evarine is made for surface rust and early spots where the metal is still solid. If a screwdriver can push through the spot, it needs welding first.
How many spots does one jar cover?
Each 30g jar covers 5 to 10 typical rust spots, since you brush it on in thin coats. Bigger or deeper spots use more.
What can I use it on?
Any steel or iron: cars, trucks, boat trailers, mowers, fences and gates. Wipe off anything that gets on trim or glass right away.
What if it doesn’t work for me?
You’re covered by our 60-day money-back guarantee. Email support@tryevarine.com and we’ll refund your order.
Evarine is made for surface rust and early spots on steel and iron. For structural rust or holes in the metal, see a professional. Results depend on the vehicle, the spot and the weather.

Stop the Rust Before It Eats Through.
Every week of salt and slush lets the rust in the pits keep eating. Pick your bundle, mix your colors and seal it this weekend.